9 Piece Dimple Die Set : 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2", 3"

Create flares in sheet metal up to 1/8" thick using the Dimple Dies. Includes both Male and Female Dies Form clean 45° flares in up to 1/8" thick steel Made with high-strength Chrome Moly steel Machined to close tolerances Simply drill the recommended hole size in the metal that you desire to dimple, then use a press to do the work. Made from heat-treated Chrome Moly steel, these dies are built to last.

• Common uses are : Providing rigidity to sheetmetal projects. -Lightening up builds -Dimple die skid plates-front bumper plates-floorboards-foot pedals-footrests and many more uses. -Use the raised side of the dimpled material for added traction on running boards and floorboards. -Or just use them to add that extra RAD look to any project
• More Details: Made for use with a hydraulic press or arbor press. Holes must be drilled before you dimple the materials.(These do not act as punches) We recommend no thicker than 1/8" material. We recommend lubricants when using the dies.This will reduce die wear and gulling.
• Metal Flaring Capacity: Mild Steel: 1/8, Aluminum: 1/8, Stainless Steel: 3/32
• Tools Required (not included): A set of sharp, high-quality metal saws in sizes corresponding to those in the Die Set. A 20 Ton Hydraulic Shop Press or equivalent.